Port 3384 HP-CLIC
Port 3384 is the IANA-assigned hp-clic port for Cluster Management Services (TCP).
What is port 3384 used for?
Port 3384 is assigned to hp-clic and uses TCP. The IANA registry describes the service as “Cluster Management Services”. It sits in the registered range, the block used by databases, application servers and developer tooling. Port conflicts here are common when several local services start at once.
Ports are the transport-layer address a service listens on. A client that wants to reach hp-clic connects to port 3384. If nothing is listening, the connection is refused. That is why a port conflict appears whenever two processes try to bind the same number.
Use the commands below to confirm whether port 3384 is actually in use before you change firewall rules. Blocking the port stops new inbound traffic at the firewall, but it does not stop a local process from listening, and it does not remove the service from the machine.
Source: IANA Service Name and Transport Protocol Port Number Registry. Registered assignee: [Rajesh_Srinivasaragh].
Check and block port 3384
Copy-ready commands for the protocols assigned to this port. Run the check first, then block only what should not be reachable.
Check on Linux
sudo ss -tlpn 'sport = :3384'Check on Windows
Get-NetTCPConnection -LocalPort 3384 -State Listen -ErrorAction SilentlyContinueBlock with UFW
sudo ufw deny 3384/tcpBlock with iptables
sudo iptables -A INPUT -p tcp --dport 3384 -j DROPThese commands are examples for a typical host. Check the listener before you change firewall rules, and persist iptables rules with iptables-save or netfilter-persistent. On Windows, use Windows Defender Firewall or New-NetFirewallRule for persistent blocks. The iptables rules here cover IPv4; mirror them with ip6tables if IPv6 is enabled.
Is port 3384 safe to expose?
This port is not on our curated list of services with a widely exploited profile. Exposure is only safe when the listening service is intended, patched and protected by a firewall. Keep the listening service patched and remove it if unused. A default-deny firewall policy with explicit allow rules is still the safest baseline.
Where port 3384 is usually used
Most traffic on port 3384 falls into these scenarios. The demo below is a safe way to confirm the listener before you change anything.
- Application backends and supporting services that use a fixed registered number.
- Containers or local stacks that publish the port on the host.
- Firewall and exposure reviews before the service goes to production.
Probe the port
Confirm something is listening before you debug the client. This checks a TCP handshake on the port.
nc -vz 127.0.0.1 3384Common problems with port 3384
Connection refused or timed out
Refused usually means the host is reachable but nothing is listening on port 3384. A timeout more often means a firewall drop, a wrong host or a service bound to a different interface.
Port already in use
Find the process holding the port with sudo ss -tlpn 'sport = :3384' or sudo lsof -i :3384. Stop that process or configure it to bind another port; killing it without identifying it can take down a production service.
Firewall rule did not survive a reboot
UFW and Windows Firewall keep rules across restarts. Raw iptables rules do not: save them with iptables-save or the netfilter-persistent package, and re-apply after upgrades that reset the ruleset.
The port is blocked but still reachable
A firewall rule filters inbound traffic; it does not close the listener. Confirm with the check command above and bind the service to 127.0.0.1 when only local clients need it.
Port 3384 at a glance
| Port number | 3384 |
|---|---|
| Service name | hp-clic |
| Transport protocol | TCP |
| Category | Application services |
| Range | Registered port (1024–10000) |
| Risk level | Standard/Low |
| Registered assignee | [Rajesh_Srinivasaragh] |
| Registry description | Cluster Management Services |
| Source | IANA Service Name and Transport Protocol Port Number Registry |
Frequently asked questions
What is port 3384 used for?
Port 3384 (HP-CLIC) uses TCP. Cluster Management Services.
How do I check if port 3384 is open?
On Linux run `sudo ss -tlpn 'sport = :3384'`. On Windows run `Get-NetTCPConnection -LocalPort 3384 -State Listen -ErrorAction SilentlyContinue` in PowerShell. If the port is open, the output shows a process listening on port 3384; empty output usually means nothing is bound to it.
How do I block port 3384?
With UFW run `sudo ufw deny 3384/tcp`. With iptables run `sudo iptables -A INPUT -p tcp --dport 3384 -j DROP`. Persist the iptables rules with your distribution's netfilter-persistent or iptables-save tooling so they survive a reboot.
Is port 3384 safe to expose?
This port is not on our curated list of services with a widely exploited profile. Exposure is only safe when the listening service is intended, patched and protected by a firewall. Nevertheless, keep the listening service patched and remove it if unused. A default-deny firewall policy with explicit allow rules is still the safest baseline.
Related ports
- Port 3383 · esp-lmEnterprise Software Products License Manager
- Port 3389 · ms-wbt-serverMS WBT Server
- Port 3390 · dscDistributed Service Coordinator
- Port 3382 · fujitsu-neatFujitsu Network Enhanced Antitheft function
- Port 3393 · d2k-tapestry1D2K Tapestry Client to Server
- Port 3377 · cogsys-lmCogsys Network License Manager
Primary data: IANA Service Name and Transport Protocol Port Number Registry.
Last reviewed 2026-10-30 · Methodology · About · Privacy